Skip to content
Serving Livermore and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (650) 203-2763

AC Installation in Livermore and the Tri-Valley

Serving Livermore and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (650) 203-2763

The short answer

If your AC is failing often, struggling to keep up on hot afternoons, or needs a major part like a compressor, a new system is usually worth pricing out. We start with an in-home assessment of your house, ducts, and electrical capacity, then explain repair and replacement options side by side so you can decide.

A new air conditioner is a long-term decision, and the right choice depends on your house, your ductwork, your electrical panel, and how you want to heat as well as cool. TotalFlow HVAC Repair Service installs central air conditioners and heat pumps for homeowners in Livermore, Pleasanton, Dublin, San Ramon, and nearby communities. This page explains when a replacement makes sense, what we look at before recommending a system, how repair compares to replacement, what drives the cost of a project, and what to expect from our first visit through startup.

Signs It May Be Time for a New AC

Not every problem calls for a new system. But some patterns suggest your current equipment is near the end of its useful life, or was never a good fit for your home in the first place.

If you notice several of these at once, an installation assessment is a reasonable next step.

  • The system runs constantly on hot afternoons and the house still doesn't reach the thermostat setting.
  • You've needed repairs more than once in the last couple of cooling seasons.
  • A major component has failed, such as the compressor or the outdoor coil.
  • Some rooms stay noticeably warmer than others, even with vents open.
  • Your electric bills have climbed without a change in how you use the AC.
  • The system uses an older refrigerant that is becoming harder and more costly to service.
  • You hear grinding, rattling, or loud clicking from the indoor or outdoor unit.
  • You're planning other work, like an addition, new windows, or attic insulation, that changes how much cooling the home needs.

What We Check Before Recommending a System

A good installation starts with the house, not the equipment. Picking a unit based only on the size of the old one can carry forward an original mistake. Oversized systems cycle on and off too quickly and leave rooms clammy; undersized systems run nonstop and still fall short.

During the assessment, we look at the factors that determine what will actually work in your home:

  • Home size, layout, ceiling heights, and which rooms get strong afternoon sun.
  • Insulation levels and window type, since both change how much heat comes in.
  • Duct condition, sizing, and sealing, including leaks or crushed sections in the attic or crawlspace.
  • Electrical panel capacity and the existing circuit to the outdoor unit.
  • Where the outdoor unit can sit, including clearance, noise considerations, and access.
  • Your current furnace or air handler and whether it pairs well with a new outdoor unit.
  • How you use the house: who's home during the day, rooms that are hard to cool, and any comfort complaints.

Repair vs. Replace: Your Options

When a system is fairly young and the problem is a single, contained part, such as a capacitor, contactor, fan motor, or a small refrigerant leak that can be found and fixed, repair is often the sensible call. We'll tell you when that's the case.

Replacement tends to make more sense when the system is older, a major component has failed, repairs are becoming routine, or the equipment never cooled the house well. In those cases, we typically walk through a few paths: replacing the outdoor AC unit and matching indoor coil, replacing the full system including the furnace or air handler, or switching to a heat pump that handles both cooling and heating.

The heat pump option is worth a serious look. Under Bay Area Air District rules, natural gas furnaces manufactured from 2029 onward must meet a zero-NOx emission standard, which in practice points homeowners toward heat pumps when a furnace is replaced after that date. Those rules don't require you to replace working equipment; they only apply when an existing furnace fails or is replaced. Still, if your furnace is aging and you're replacing the AC now, it can make sense to plan both together.

What Affects the Cost of AC Installation

Every installation is quoted after we've seen the home, because the cost depends on several variables that differ from house to house. These are the main ones:

  • System type: AC with a furnace, a heat pump, or a ductless mini-split.
  • Equipment efficiency and features, such as single-stage versus variable-speed operation.
  • Required capacity, based on the load assessment rather than the old unit's size.
  • Ductwork: whether existing ducts can be reused, need sealing and repairs, or need partial replacement.
  • Electrical work, including a panel upgrade or new circuit if your current service can't support the system.
  • Installation access, such as tight attics, crawlspaces, or a new location for the outdoor unit.
  • Permits and inspections required by your city.
  • Available incentives. Bay Area homeowners can check BayREN and their local clean energy provider for heat pump and electrification incentives. Amounts and availability change by funding cycle, so we confirm the current offer before including it in a quote. Note that the federal Energy Efficient Home Improvement Credit (25C) covered qualifying heat pumps placed in service before December 31, 2025, and isn't available for new installations after that date.

How an Installation Visit Works

First, we schedule an in-home assessment. A technician looks at your current equipment, ducts, electrical panel, and the rooms you're trying to cool, and asks how the house has been performing. Bring up any comfort complaints you've noticed; they help shape the recommendation.

Next, we explain your options in plain terms. If repair is a reasonable choice, we'll say so. If replacement makes sense, we'll lay out the system types that fit your home, what each involves, and the factors behind each written quote.

On installation day, we protect floors and work areas, remove the old equipment, set the new indoor and outdoor components, connect refrigerant lines and electrical, and make any agreed-upon duct or electrical changes. We coordinate the required permit and inspection.

Finally, we start the system, check refrigerant charge and airflow, confirm the thermostat is set up correctly, and walk you through basic operation and filter changes before we leave.

AC Installation by city

What to expect

How a visit goes

  1. Find the cause first

    We test and inspect before recommending parts or equipment, so the fix matches the actual problem instead of a guess.

  2. Clear options, no pressure

    When a system could be repaired or replaced, we lay out both paths and the tradeoffs, then let you decide what fits your home.

  3. Current information on rules and incentives

    Air District rules and rebate programs change. We confirm what applies today before we talk about it, so you can plan with accurate information.

FAQ

Common questions

How long does an AC installation take?

Many straightforward replacements are finished in a day. Projects that involve duct changes, electrical upgrades, or switching to a heat pump can take longer. We'll give you an expected timeline after the assessment.

Can I replace just the outdoor unit?

Sometimes, but the outdoor unit and indoor coil need to be matched to work properly and efficiently. We'll check your indoor equipment and tell you whether a partial replacement is a sound option.

Should I get a heat pump instead of a new AC?

It depends on your home and your furnace. A heat pump cools like an AC and also heats. Since Bay Area Air District rules will point furnace replacements toward zero-NOx options from 2029, a heat pump is worth considering, especially if your furnace is older.

Do I have to replace my working furnace because of the new air district rules?

No. The Bay Area Air District appliance rules don't require replacing working equipment. They only apply when an existing furnace or water heater fails or is replaced.

Are there rebates for a new heat pump?

There may be. Check BayREN and your local clean energy provider for current offers. Because amounts and availability change by funding cycle, we confirm the current incentive before quoting it. The federal 25C credit isn't available for installations after 2025.

Do you install in cities outside Livermore?

Yes. We work with homeowners in Livermore and nearby cities, including Pleasanton, Dublin, and San Ramon. Ask when you schedule if you're unsure whether we cover your area.

Need Heating or Cooling Help in Livermore?

Tell us what your system is doing, or not doing, and we'll schedule a visit to find the cause and walk you through your options.

(650) 203-2763
Call (650) 203-2763 Request Service