Skip to content
Serving Livermore and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (650) 203-2763

Furnace Repair in Union City, CA

Serving Union City and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (650) 203-2763

The short answer

TotalFlow HVAC Repair Service repairs gas furnaces in Union City homes, including no-heat calls, ignition failures, short cycling, weak airflow and unusual noises. We find the cause before recommending a fix. If replacement comes up, we explain how Bay Area Air District rules apply, and you are not required to replace a furnace that still works.

When the furnace stops heating on a cold, damp East Bay night, you want to know what failed and what your options are. TotalFlow HVAC Repair Service handles furnace repair for homes throughout Union City, from our base in Livermore about 14 miles away. We diagnose the actual problem, explain it in plain terms, and give you the information you need to decide on a repair. If your furnace is near the end of its life, we'll also tell you how the Bay Area Air District's appliance rules apply to your choice.

Furnace Problems We Repair in Union City Homes

Most furnace calls come down to a handful of causes. A part wears out, a safety switch trips, or airflow gets restricted until the system shuts itself down. Union City winters are mild compared with much of the country, so many furnaces sit idle for months. That means a problem often shows up the first time the heat comes on in the fall.

Common reasons homeowners call us include:

  • The furnace runs but blows cool or lukewarm air
  • The burners won't light, or they light and then shut off
  • The system turns on and off every few minutes (short cycling)
  • Weak airflow from the vents, even with a clean filter
  • Banging, squealing, rattling or humming from the furnace cabinet
  • The thermostat calls for heat but nothing happens
  • A burning or electrical smell that lasts beyond the first few minutes of the season

What Happens During a Repair Visit

We start by asking what you've noticed: when the problem began, what the furnace does, and any sounds or smells. Then we check the system in order. That covers the thermostat and power supply, the ignition and flame sensor, the safety limit switches, the blower motor, and the filter and return air path. On gas furnaces, we also look at venting and the burners, because those affect both performance and safety.

Once we find the cause, we explain what failed and why, and what the repair involves. We don't start work until you've agreed to it. If something looks worn but hasn't failed yet, we'll point it out so you can plan ahead, without pressure to fix it today.

Repair or Replace? What the Air District Rules Mean for You

Most furnace problems are worth repairing, especially when the rest of the system is in decent shape. Replacement starts to make sense when major components keep failing, the heat exchanger is compromised, or repair costs are climbing on an aging unit. We'll give you an honest read on where your furnace stands.

Union City homeowners should also know about the Bay Area Air District's appliance rules. Under Rule 9-4, natural gas furnaces manufactured from 2029 on must meet a zero-NOx emission standard. In practice, that points homeowners toward heat pumps when they replace a furnace after that date. The rules do not require you to replace working equipment. They apply only when an existing furnace fails or is replaced. Repairing your current furnace is still a valid choice.

If you're weighing a heat pump, note that the federal Energy Efficient Home Improvement Credit (25C) only covered qualifying heat pumps placed in service before December 31, 2025. It isn't available for new installations now. Bay Area homeowners can still check BayREN and their local clean energy provider for current heat pump and electrification incentives. Amounts and availability change with each funding cycle, so we confirm the current offer before including it in any quote.

Quick Checks Before You Call

A few simple checks can sometimes get the heat back on, or at least help us diagnose the problem faster:

  • Make sure the thermostat is set to Heat and the set temperature is above the current room temperature
  • Replace thermostat batteries if the display is blank or dim
  • Check the furnace filter and replace it if it's clogged
  • Confirm the furnace power switch, which often looks like a light switch near the unit, is on
  • Check the breaker panel for a tripped breaker
  • Make sure the furnace access panel is fully closed, since many units won't run with it loose

Serving Union City and Nearby Communities

We provide furnace repair throughout Union City, ZIP code 94587, in Alameda County. Our technicians also work in nearby Hayward, Newark, Fremont, Pleasanton and Dublin. If you're nearby and not sure we cover your street, just ask when you contact us.

More services in Union City

Related

What to expect

How a visit goes

  1. Find the cause first

    We test and inspect before recommending parts or equipment, so the fix matches the actual problem instead of a guess.

  2. Clear options, no pressure

    When a system could be repaired or replaced, we lay out both paths and the tradeoffs, then let you decide what fits your home.

  3. Current information on rules and incentives

    Air District rules and rebate programs change. We confirm what applies today before we talk about it, so you can plan with accurate information.

FAQ

Common questions

Do I have to replace my gas furnace because of the new Bay Area Air District rules?

No. The Air District appliance rules do not require replacing working equipment. They apply only when an existing furnace fails or is replaced, so repairing your current furnace is still an option.

What changes in 2029 for gas furnaces?

Under Rule 9-4, natural gas furnaces manufactured from 2029 must meet a zero-NOx emission standard. In practice, that points homeowners toward heat pumps when replacing a furnace after that date.

Can I still get the federal tax credit for a heat pump?

No. The federal 25C credit covered qualifying heat pumps placed in service before December 31, 2025, and it isn't available for new installations after that date. Check BayREN and your local clean energy provider for current incentives.

Why does my furnace keep turning on and off?

Short cycling is often caused by a clogged filter, an overheating safety switch, a dirty flame sensor, or a thermostat problem. A technician can pinpoint which one is causing it.

Is a burning smell from my furnace normal?

A brief dusty smell when the heat first runs for the season is common. If the smell lasts, smells electrical, or you smell gas, turn the system off and call for service. If you smell gas, leave the house and contact your gas utility.

What areas near Union City do you serve?

Besides Union City, we serve Hayward, Newark, Fremont, Pleasanton and Dublin from our base in Livermore.

Need Heating or Cooling Help in Livermore?

Tell us what your system is doing, or not doing, and we'll schedule a visit to find the cause and walk you through your options.

(650) 203-2763
Call (650) 203-2763 Request Service